![]() In the case of the Q-SUN testers, a special reference black panel thermometer must be used.įor the QUV tester, this is accomplished simply by using any reference thermometer. The reference thermometer itself needs to be calibrated once per year. All QUV and Q-SUN testers are equipped with the SOLAR EYE irradiance control system (except for the QUV/basic tester). The SOLAR EYE system monitors and accurately maintains irradiance levels within the tester. The sensor within the SOLAR EYE system must be calibrated by the user periodically. This is accomplished with a special calibration radiometer. This radiometer itself needs to be calibrated once per year. The Universal Calibrator (UC) system is used for calibration of temperature in Q-SUN testers and irradiance in QUV and Q-SUN testers. This system consists of a handheld display unit that can be used “plug and play” with all irradiance and temperature sensors. Q-Lab also services and supports existing calibration radiometers (CR10 and CR20) and calibration thermometers (CT202). Either system can be used with any QUV or Q-SUN tester. The QUV black panel temperature sensor needs to be calibrated periodically by the user to assure accurate and consistent results. Just get in touch before making your purchase and let us know what you want your Little Box to doįor more information, download the instruction document, or drop us a line using the contact page.In the event of an unlikely failure, a replacement can be ordered under the following part number: Calibrating the QUV black panel temperature sensor is simply performed with any standard reference thermometer.Temperature sensors do not require normal replacement. Need something slightly different? Need to send specific MIDI commands, or send a second command when a button is released? We are more than happy to customise the software on the USB GO BOX to suit your needs, whatever they may be. If you would like alternate modes please send us an email before checking out using the contact page. These can be set as your default commands in "Learn Mode" to ease set up, you can still use your USB GO BOX with all of your other software in MSC mode and PC1 mode. As well as the standard command set, we also offer alternative Presets designed for use with Pro Tools, Ableton and Digital Performer. once received it will part that command back whenever the appropriate button is pressed until you tell it to do otherwise. all you need is to elect the USB GO BOX is a MIDI output and send a midi command to it. in this mode you can make your GO BOX output whatever commands you like. A simple rugged metal box with 6 buttons, trusted by shows in venues from arenas and Broadway pits, to studio theatres and conference rooms all over the world.Īll new USB GO BOXes now come with Learn Mode. With the USB GO BOX you know 100% that when you press GO, its gonna GO. Companies and clients spend thousands on fully redundant backup systems to ensure that the show will always go on, and it all comes down to one button. The number one concern when using any kind of show control is reliability. This might be one at FOH and one for the MD, or maybe one for cue list control and one for FX on the fly. This allows for the use of 2 USB GO BOXes in program change mode in the same MIDI environment. ![]() The unit also offers a third mode that outputs Program change data on MIDI channel 2. ![]() ![]() The USB GO BOX is an incredibly flexible tool, Both MSC and Program Change (PC) modes come Pre-loaded as standard, making it easy to integrate with an existing system, or quickly take control of a new show. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |